Vehicle Lifts, Hoists & Jacks - Page 5 - Blowout Sale! Save up to 59%
Blowout Sale! Up to 59% off on Vehicle Lifts, Hoists & Jacks at Lazaranda Dallas, Page 5. Top brands include Mophorn, Dragway Tools, LiftMaster, Torin, FidgetFidget, Tdogs, Replacement Kits, Eric, MarchInn, TRIUMPH, Ultra-Fab Products, Autobaba, BMW, Pittsburg, atliprime, & OTC. Hurry! Limited time offers. Offers valid only while supplies last.
LiftMaster 2.5 Ton Low Profile Floor Jack
You Save: 8%
mpn: 600KA, ean: 0799804607217,
4.3 out of 5 stars with 46 reviews
Fit Under Low Ground Clearance Vehicle This Liftmaster Low Profile Floor Jack is a 2.5 Ton floor jack that give you better access to low ground clearance vehicle. And,give you the lifting range from 3.15 inches to 14.5 inches. The Jack can be fit under a clearance of 3.15 inches and maneuvered easily into position. This floor jack also features the heavy duty steel construction that provides the long lasting durability. Liftmaster's unique bypass device protects against over pumping. Its
Torin Big Red Aluminum Jack Stands: 3 Ton Capacity, 1 Pair
You Save: 24%
mpn: T43004, ean: 0615268430041,
4.1 out of 5 stars with 46 reviews
The Torin Big Red aluminum jack stands are a must have necessity in any garage. The lightweight, 3 Ton (6,000 lb) capacity jacks are sold as a pair, help support your vehicle and are designed and dedicated to keeping you safe. Features a lift range of 10.71'' to 15.63'' and a large foot base size of 7.48'' by 6.81''. The large saddle surface area provides better contact with the load being supported and the removable locking support pins gives you security and stability where you need it most.
FidgetFidget Lift Accessories For Auto Truck Hoist 4x Octagon Heavy Duty Rubber Arm Pads Car
mpn: KumorefunW-CHETU-627-7DF3FC47AA, ean: 6954225736593,
4.2 out of 5 stars with 62 reviews
Description:Technical SpecificationsType: Car lift accessoriesMaterial: RubberColor: Black4Pcs Octagon 135*10mmShape: OctagonThickness: 10mm(3/8'')Length: 135mm(5.3'')Features and Benefits● This is a set of 4 HEAVY DUTY lift pads.● These were found on many different brand lifts.● These are very thick and very durable. They are able to hold up to sharp sub-frames and pinch weld lifting points..
Mophorn Pneumatic Jack 3 Ton Triple Bag Air Jack Lifting Height 18Inch Pneumatic Air Jack 6600LBS Capacity Extremely Fast Lifting Action (3 Ton)
You Save: 59%
mpn: Pneumatic Jack, ean: 0712166607060,
4.2 out of 5 stars with 87 reviews
3 Ton Triple Bag Air Jack 4400LBS Capacity Introduction Pneumatic Jacks Designed Tough and Built to Last! double bag air Jacks are the preferred jacking tool on frame racks, alignment machines and in all types of repair shops. Every air Jack is super fast and virtually maintenance free. Bag air Jack is one of the most useful tools in the body shop. It's compact, powerful and very fast to use. Bag air Jack is simply the easiest and fastest way to install pinch weld clamps on the frame machine.
Torin Big Red Hydraulic Stubby Bottle Jack, 12 Ton Capacity
You Save: 34%
mpn: T91207A, ean: 0785422254537,
4.1 out of 5 stars with 12 reviews
Torin Jack Stubby Bottle Jack - 12 Ton This Torin Stubby Hydraulic Bottle Jack 12-Ton lifts a 24,000-lb. load from 7-1/2 inches to 11 inches high. Ideal for auto and repair shops, loading docks, warehouses and factory floors. Not for use where sideways or downward force is required. Powerful jack make big loads easy to lift. High-quality, glide-action pressure pump. Chrome plated cylinder makes the jack durable. Heat-treated saddle, large size base makes the jack more safe. 100 percent factory
Square Rubber Arm Pads for BendPak / Danmar 2-Post Car Lift New Set of 4
mpn: BPLP-0132, ean: 0853073007489,
4.4 out of 5 stars with 58 reviews
Replacement Kits cradle lift pad kit is sold with a set of 4 pads that fit cradle 5215506. To keep costs lower our kit is sold without hardware, that usually does not need to be replaced. Dimensions 4-3/4'' x 4-3/4'' with 4 thru holes For use with some Bendpak, Globe and Danmar 2 Post Lifts Equivalent to: GV-10 LP618 BH-7256-20For use with some BendPak, Globe and Danmar 2 Post Lifts. Dimensions 4-3/4'' x 4-3/4'' with 4 thru holes. Equivalent to: GV-10. Highest Quality Longest lasting Parts on
ERIC EK-50 Compatible Models Torin Big red T43002 Jack Pad Adapter Rubber Pads Slotted Frame For Jack stand (2pieces ) general-purpose rubber.
mpn: EK-50, ean: 4562467832069,
4.6 out of 5 stars with 99 reviews
Quantity: 2 pieces Torin big red Can be used for T43002 or A. It is used to avoid scratching the car body when jacking up the vehicle. Please check the usage in the image. Length: 63 mm Height: 50 mm Width: 44 mm Groove depth: 17 mm. Dimensions are also shown in images Other If you have a jack stand of the same shape, you can use it as a general purpose item. As the material of this product is rubber, please refrain from using for long time.Quantity: 2 pieces Length：63ｍｍ Hight：50ｍｍ
TRIUMPH NSS-8 8000Lbs 4 Post Storage Service Lift
4.0 out of 5 stars with 12 reviews
Auto Lifts, Four Post Lifts, Two Post Lifts, Parking Lifts must be unloaded from the delivery truck by the buyer. The truck driver does not assist in unloading your lift. Lift gate is not available with Auto Lift deliveries. This car lift is great for storage or service. This lift comes with a caster kit, jack tray, and three drip trays. The drips trays will keep any fluid from the top vehicle from dripping on the bottom vehicle. Jack tray allows you to use a bottle jack or floor jack to
Ultra-Fab Products 48-979006 24" Ultra Scissor Jack
You Save: 18%
mpn: 48-979006, ean: 0649119790060,
4.7 out of 5 stars with 51 reviews
Ultra Scissor Jack - 24'' - no hand crank.Ultra scissor jacks give added stability to travel trailers, fifth wheels, horse and cargo trailers; Powder coat black finish resists rusting; Large 5'' X 9'' footpads combat sinking and tilting; Extends from 4-3/4'' to 24''. Single scissor jack - does not include crank handle. Bolts or welds to frame (bolts not included). Manufacturers Lifetime Warranty.
Liftmaster 3 Ton SUV High Lift Floor Trolley Jack Car 4x4 Van Pickup
You Save: 5%
mpn: 630A, ean: 0609722800235,
4.6 out of 5 stars with 16 reviews
Body Frame was pressed using the same sheet of iron which is much more rigid then conventional two pieces design! Screw Adjustable Saddle, fit a range of heights seamlessly! Better than similar ones sold by other vendors with two sockets for only two different height. Weight:18Kg (40lbs)21 inches High Lift suitable for SUVs and off road vehicles. ANSI/CE certified for machinery and product safety. Capacity: 3 Tonne. Lifting range 190-530mm (7.5-21inches).
Spare Tire Kit Scissor Jack with Speed Handle 2 Ton Floor Jack Wind Up Lift for Caravans/Honda Jazz/Audi / BMW/Benz / Ford/Toyota / Dodge/Chevy
mpn: AB1-us autoemg+Jack, ean: 0613852812303,
4.1 out of 5 stars with 120 reviews
Before Use: 1. Check before each use for abnormal conditions such as cracked welds, leaks, damaged, loose or missing parts. 2. Inspect the jack immediately if lift is believed to have been subjected to an abnormal load or shock. 3. If the jack is found to be damaged, it should be removed from service until properly repaired.Attention: 1. Study, understand and follow all instructions before operating this device. 2. Do not exceed rated capacity as designated by the height/capacity curve.(Sea
BMW (2006-2010) Jack Pad for Lifting Car GENUINE
mpn: BMW_5171723719560109, ean: 0766194492433,
4.1 out of 5 stars with 101 reviews
This part fits:Exx: (fits years) : Modele82: 2008-2009: 128i: 4 Per Care82: 2008-2009: 135i: 4 Per Car e90: 2006-2007: 325xi: 4 Per Care90: 2006-2007: 325i: 4 Per Care90: 2007-2008: 328xi: 4 Per Care90: 2009-2009: 328i xDrive: 4 Per Care90: 2007-2009: 328i: 4 Per Care90: 2006-2007: 330xi: 4 Per Care90: 2006-2007: 330i: 4 Per Care90: 2007-2008: 335xi: 4 Per Care90: 2009-2009: 335d: 4 Per Care90: 2009-2009: 335i xDrive: 4 Per Care90: 2007-2009: 335i: 4 Per Care90: 2008-2009: M3 Sedan: 4 Per Car
Torin Big Red Hydraulic Bottle Jack with Carrying Case, 2 Ton Capacity
You Save: 22%
mpn: T90213, ean: 0785422871598,
4.6 out of 5 stars with 75 reviews
The bottle jack features heat treated extension screw that allows low pickup height adjustment and maximum lift height. Serrated, heat treated saddle provides generous lifting area and secure grip. A wide, rugged base provides stability and strength. All models critical stress points are reinforced for added durability and dependability. Capacity: 4000 lbs. Lifting range: 6-7/8'' to 13-1/4''.Heat treated extension screw. Serrated, heat treated saddle. Wide, rugged base. With case.
OTC (5372 Stinger 3 Ton Jack Stands - Pair
You Save: 35%
mpn: 5372, ean: 0731413570643,
4.4 out of 5 stars with 61 reviews
The OTC 5372 are made with a formed and welded steel base for strength and a self-locking ratchet handle cannot be released under load. A durable baked enamel finish resists corrosion and the stands also conform to ANSI PALD load rating standard. These stands are factory tested before shipment, and have welded foot pads that resist sinking into soft ground or asphalt. Base of 8-1/4'' x 7-1/2'' and height range of 12'' to 17-11/16''.Made with a formed and welded steel base for strength. A