OBD II Memory Saver Connector with Two 2 Alligator Clips
Blowout Sale! Save 56% on the OBD II Memory Saver Connector with Two 2 Alligator Clips by Vgate at Lazaranda Dallas. MPN: 43313-3054. Hurry! Limited time offer. Offer valid only while supplies last. Replace the battery will encounter these problems? As we all know, to the owners do not change how much money the battery, because power, you have to
Product Description & Reviews
Replace the battery will encounter these problems?
As we all know, to the owners do not change how much money the battery, because power, you have to set the vehicle time, lifting the glass, set the throttle, set the steering wheel steering angle sensor, audio lock, remote control failure.
With the Memory Saver Connector tools, the above situation will not appear.
The use of environmentally friendly high-quality materials, no odor non-toxic ingredients, tough and soft wear resistance, not winding, environmental protection and durability.
First connection the battery, the red indicator light
Connect the battery to the 16pin OBD connector of the car
When you insert OBD, The device beeps.
Operating instructions and notes:
1, with a red clip to connect the backup battery cathode, black to connect the negative (Positive and negative polarity will burn the car computer).
2, plug the red light, and then insert the car OBD plug, this time has been issued by the sound of drops, indicating normal connection.
3, at this time can change the battery, careful operation, pay attention to the replacement of the battery must lock the car, do not open the lights and other electrical equipment, not to the battery positive ground, otherwise it will burn the car OBD socket fuse.
4, for a good battery, the first release of the tools of the red clip, if also drops at this time ring, indicating successful, if there is no sound, indicating that the fuse burned.
1 × Memory Saver Connector
1 × Plastic bag
Features & Highlights
- Prevents electronic memory loss when disconnecting a vehicle's battery preserves vehicle codes and electronic presets.
- First connect the battery, connect the battery, the red indicator light.
- Connected to the 16pin OBDII port, a drop beep ring to prove the connection is normal.
- Red clip link back-up battery positive, negative black negative.(Support more than 30A high current.)
- The use of high-strength high-quality copper wire, silicone flame retardant cable, the flexibility is not easy to burn broken, with good insulation.
5 x 1.5 x 5 inches
Have questions about this item, or would like to inquire about a custom or bulk order?
If you have any questions about this product by Vgate, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.
Related Best Sellers
mpn: BT100, ean: 0619730708034,
The Schumacher BT-100 100-Amp Batter Load Tester is great for everyday use on 6V and 12V batteries. It can test load, battery condition, starter motor draw, and offers complete charging system diagnosis. Its shock-resistant meter is housed in a sturd...
mpn: 4333089652, ean: 0738770030308,
Notice: -Make sure your "C" terminal is either connected to the Battery "+" or a Key switch, Othersise, Meter will scan from full to empty then shuts off . -Meter will stay full position while first is connected with batteries and indicate the actual...
mpn: MST-8000+, ean: 0712383647368,
Top 8 Reasons to Get MST-8000+: 1. Support Multi-languages: English, Portugues, Espana, French, Deutschland, Italian, Russia,Chinese, Japanese,Turkish and Chinese(Traditional) 2. Support Batterty: 12V or 24 V 3. Can quickly and accurately test perfor...
mpn: AY2010, ean: 0603338547560,
Product Features: -Works for both 12V / 24V, 36V, 48V / 72V battery, used for truck, RV'S, Golf cart or any battery operated unit. -High reliability, low cost and compact size. -LED Flash for low charge & high charge warning. -Specifically designed ...