Saves you money and is the economical alternative to costly dent professionals.
Well a starter repair kits for irregular dent damage.
How to use the pdr tools :(Suit for dent&ding and home DIY repair)
1.Clean damage surface with a clean wet cloth.
2.Put the glue stick to gun and connect the power source and preheat for 5-10 minutes.
3.Pull the trigger and apply the suitable drawing gasket with extruded glue (The 4 holes of gasket should be applied with hot melt glue)
4. Immediately place the drawing gasket with hot melt glue in the center of the dent and hold until sticks (Let the glue cool for about 5-8 minutes. The cooling time should be less than 10 minutes and should be shorter slightly in winter)
5. Align the T-shaped repairer and press the drawing gasket with hot melt glue, pull the sliding rod backwards to pull up the dent.
6. When dent was removal, clear the glue by alcohol with plastic shovel.
7. If dent still exists, knock it slightly with a flattening hammer with Tapdown head 8 Repeat the operation steps above until the dents are repaired.
Note: If you don't know how to use the pdr tool, please contact with us, we will send the video link to you. Because we have no right show the video link in the Amazon page, hope your kindly understanding.
1pcs tool bag
1pcs gold dent lifter
1pcs bridge puller
1pcs hot glue gun
1pcs rubber hammer
5pcs yellow glue sticks
1pcs tapdown set with 5 heads
5pcs blue puller tabs
12pcs black puller tabs
1pcs Small plastic shovel