Different from the traditional tiring and boring oil replacing method.
Easy to operate, one person can finish brake fluid replacing work.
Highly flexible transparent hose can be docked with a variety of brake cylinder emptying screws, acid and alkali corrosion resistance.
Clean and environmentally friendly, without dirty oil stained on the floor.
Suitable for cars, trucks and engineering vehicle.(A small number of the model can be slow to draw the emptying screws)
Material: Metal + plastic
Product tube length: 80CM
Product work pressure: 8 kg(appr.)
Product capacity: nearly half a liter
Size: 15 x 6cm /5.91" x 2.36"(appr.)
How to use:
1.Take away the dirty brake fluid from the tank;
2.Put in the new fluid back;
3.Start the car and connect the hose between the equipment and the brake branch pump;
4.Twist the screw to be loose, but not completely. Then open valve to start siphoning the fluid out.Please turn off the valve after screwing when it finish.
5.Our tool fit for universal cars, you can use the tapered spout which is offered in the package avoid air leaking;
6.Please lift the tool over the brake pump to ensure it work properly.
1 x Pumping oil Kit
1 x Speed connection
Note: Due to the difference between different monitors, the picture may not reflect the actual color of the item.